Removing Mould and Damp From Your Home
Mould and damp is usually caused by excess moisture in your home, causing problems for your belongings and possibly to your health. Read our guide on avoiding condensation in your home.
2 minute read
Everyday things like washing, bathing and cooking can cause moisture in the air. The air can only hold so much before it turns into water droplets, hence your bathroom mirror steaming up after a shower. A small amount of condensation is perfectly normal, especially on your windows after a cold night. However if you’re suffering with large damp patches and are experiencing mould regrowth, then read on:
Less Moisture
- Dry any laundry outside when you can
- Position a tumble drier vent to lead the outside of your home, or use a condensing tumble drier.
- Don’t leave kettles boiling and always cover pans which have liquid steaming during the cooking process
Ventilation
- Keep a window or trickle vent open when a room is in use
- Ventilate bathrooms and kitchens
- Keep bathroom and kitchen doors closed
- Don’t overfill wardrobes. Cut small holes in the back and pull them away from the wall so they are being ventilated from all angles
Heating
- Heating your home as much as possible reduces the level of mould, as warmer air can hold more moisture
Cleaning
- Wash away any mould with an approved mould cleaner and dry with a towel
- Regularly clean window frames and other affected areas
- If you need to redecorate, use a good-quality fungicidal product. Your best bet is to remove any previous lining paper or wallpaper and just start over
*How To articles are intended as advice only. Please refer to your completion documents for specific information on lease and covenant restrictions and maintenance of your home.*
